Wanted - Disc mag wheels no tires

[G_YamTech_314]

Looking to score a set of decent condition mag wheels with a rear disc (not the rare and expensive drum mag rear)

I'd highly prefer no tires included, as I'll need to buy new anyways, and it makes shipping cost a ton.

Who's got 'em? Much appreciated

 

[Jim]

Looking to score a set of decent condition mag wheels with a rear disc (not the rare and expensive drum mag rear)

I'd highly prefer no tires included, as I'll need to buy new anyways, and it makes shipping cost a ton.

Who's got 'em? Much appreciated

From the same bike I took your swingarm off of. I'll get you some pics in the morning.

 

[G_YamTech_314]

You would be the man Jim! Sounds great. PM me whenever it works best for you.

 

[willis]

I also have a set if Jim’s don’t pan out for you. I replaced the wheel bearings and repainted them but never ran em. Also have a set of drilled rotors that I could make as a package deal if interested.

 

[G_YamTech_314]

I also have a set if Jim’s don’t pan out for you. I replaced the wheel bearings and repainted them but never ran em. Also have a set of drilled rotors that I could make as a package deal if interested.

I'm open to multiple options.

What's the price for the whole deal?

What color are they painted???

 

[willis]

Painted black except the outter ring is still natural. I’d have to remove the tires but that’s not a big deal. I’ll get some pictures for you tomorrow.

 

[willis]

Here’s a picture of them mocked up. They’ve been in storage a few years since I switched to 19’s front and rear. Also have a couple 19’ that were drilled out if that interests you too.

 

[Jim]

Well shoot. Gettin' old and forgetful. Can't find 'em... musta already sold 'em.
Your turn Willis.

 

[OHRider]

Here is what I have. 19 inch without rotor $35, 16 inch with rotor and sprocket $75, 16 inch without rotor and sprocket $35. All plus’s shipping. Can remove tires. All will need painted.

 

[halfmile]

Hey Jim. Didn`t I trade you some DT250 stuff for those?? I think their the ones I painted red for my No Theme build

 

[Jim]

Hey Jim. Didn`t I trade you some DT250 stuff for those?? I think their the ones I painted red for my No Theme build

Sumbich... yep Phil... that's where they went.

 

[halfmile]

They say that memory is the first thing to go. I can`t for the life of me remember what the second thing was?

 

[G_YamTech_314]

In regards to my second guessing all of this before settling in a purchase, what are the biggest differences between a 19 and 16" rim for the rear aside from chain rub and top speed?

Smaller tires make top speed lower correct?

Would a cafe racer look at all decent with the 16"? I know this is all stuff I need to make my own opinion on, but it helps me to hear from other perspectives about something so important. I want the bike to handle well, and also be reasonably fast, and of course I want it to look super good too. What are some thoughts on this all?

 

[willis]

19” on left vs 16” on right.

16” can run a wider tire, up to a 130. If you go with dual 19’s you will need to buy the Omar’s adapter kit. Runs in the neighborhood of $300. Taller shocks should also be considered. Not sure that speed is a factor between the two sizes but the 19” rear would be a bit nimbler than the 16.

 

[G_YamTech_314]

Wait, so both of those pics featured a 16" rear? You say left right, but the pics are on top of one another. Just wanting to be sure I know what I'm looking at lol!

EDIT****** I view the forum on a smartphone... When I turn it sideways your photo orientation is correct. My apologies

 

[G_YamTech_314]

I'm assuming an Omar's adapter kit is a front mag revamped to fit the rear? Or? This is all stuff that I've allowed myself to be ignorant of. Oops

 

[OHRider]

I'm assuming an Omar's adapter kit is a front mag revamped to fit the rear? Or? This is all stuff that I've allowed myself to be ignorant of. Oops

I used a Omar 19” adapter kit for my Storm no shock change. Running a 4.00 tire.

 

[willis]

Yes, the Omar adapter kit allows you to use a stock front 19” wheel on the rear. It is a straight bolt on kit.