Robert Dell Aquila
Shine it on
Hows it going all, recently purchased a Pamco 277 igniton to replace my point model on my rephased 78 650. Was having timing issues and decided to upgrade to the Pamco. I installed the ignition using Hughes's guide. The problem I'm having is wiring to my coils. The wires coming out of the coils are different on each coil. On the left side there is an orange and brown wire. On the right an orange and red/white wire. The previous owner had the orange wires hooked up to the kill switch. And the red/white and brown wires hooked up to the two black wires coming from the condensor. Pretty sure this wiring is wrong from what I've been reading. If anyone could shed some light on this it would be very much appreciated! Thanks