ninskrillz
XS650 Addict
- Messages
- 271
- Reaction score
- 67
- Points
- 28
Ok so after a few weeks of a break from working on the bike I decided to fire it up. It started a bit rough from sitting but smoothed out once warm.
I noticed it was smoking a little bit of greyish white smoke on decel on one cylinder and with the throttle on another. I also noticed quite a bit of condensation from the left cylinder.
If there’s some sort of leak from the valves or rings could that possibly cause an overly lean situation and the stumble I’ve been dealing with?
I noticed it was smoking a little bit of greyish white smoke on decel on one cylinder and with the throttle on another. I also noticed quite a bit of condensation from the left cylinder.
If there’s some sort of leak from the valves or rings could that possibly cause an overly lean situation and the stumble I’ve been dealing with?