[QUOTE="xjwmx, post: 700799
Wondering what mods Jay has done if he would reveal them. Got to be fast, going by the clothing...[/QUOTE]
JE pistons 750cc, worked on head not just ported, unknown cam, not high lift but long duration with exhaust longer than the inlet, 2mm over valves, crank is welded, using electrex world ignition, still setting up after a change to the engine, I tried a mega cycle cam but decided to go back to my old cam as I hadn't tried it with the 2mm over valves, mainly running 1/8th this year last time out although times were slightly down, but that was due to me struggling with the heat top speed was up to just over 92mph, over the quarter best is 11.88 at 110mph bearing in mind I'm over 200lbs it's not too bad
Wondering what mods Jay has done if he would reveal them. Got to be fast, going by the clothing...[/QUOTE]
JE pistons 750cc, worked on head not just ported, unknown cam, not high lift but long duration with exhaust longer than the inlet, 2mm over valves, crank is welded, using electrex world ignition, still setting up after a change to the engine, I tried a mega cycle cam but decided to go back to my old cam as I hadn't tried it with the 2mm over valves, mainly running 1/8th this year last time out although times were slightly down, but that was due to me struggling with the heat top speed was up to just over 92mph, over the quarter best is 11.88 at 110mph bearing in mind I'm over 200lbs it's not too bad