Search results

Disregard - sold Sold sold sold

This is one of those "it should be obvious" questions, but I thought I would double-check with you guys. I have an AGM battery from Mikes that I bought Jan. 2012. A couple months ago my starter button broke so I got a new one, but electric start wouldn't even budge. So I figured maybe the whole...

I just finished installing a new ignition switch. Before sealing the headlamp I briefly turned it on to verify the headlamp and turns signals were functioning properly. Great right? Well I button everything up and few mins later come back to leave. I turn the switch, hit the starter button and...

I have a stock '80. I am getting a new inspection/license plate bracket (probably like part #600-447 at J&P) and am wondering if anybody has recommendations for anti-theft bracket locks. Also somewhat unrelated but any recommendations on security chains/u-locks as well? Thanks :thumbsup:

I have a little story from an incident today. I'm going out for a ride to do errands, stopped at a traffic light. I start off again and suddenly my bike jerks real funny and I hear a grind, and I'm like OK what's up with this POS transmission it's never done that :laugh: :D But after that it...

I replaced my headlight bulb several months ago and all has been well until recently. The regular/daylight bulb stopped shining, but my brights work fine. Thinking maybe the dim bulb went out, I connected a good lighting reserve unit to see if it would switch. Nothing. Thinking it could be...

Got my Pamco from Mikes and like mentioned from someone else around here, the kit doesn't come with any wires other than those for plugs and those connected to the Pamco board. I don't want to screw something up the first time round, so I just want to know if there is a specific gauge wire...

Suddenly my motorcycle has been running like **** below 3K RPM, I am thinking it is the carbs but want to know what you guys think before tearing it down. Seems to be charging fine (will test volts when I get time), although when I turn on the blinker and hold the thottle open, the engine revs...

I've been a longtime MikesXS customer and I've never had a problem with any of my orders.......until now. I placed an order over the weekend, it was shipped Monday. Delivery date was supposed to be Thursday, but of course then the Hurricane moved in and delayed it. I am leaving for a trip on...

Okay, so last week was my headache trying to get the headlight to come on when it was just the bulb burned out! I'm hoping this issue is as simple to fix! :laugh: I rarely if ever have any problems with this machine, but when I get the occasional minor issue I tend to go overkill and replace...

I briefly posted about my issue but decided to start my own thread.......... I bought and installed brand new OEM wiring harness for my '80 Special II. I also bought and installed a brand new OEM clutch-side switch. After connecting everything I start up the bike and the indicator lights...

Drive chain rivet flaring tool? (SOLVED) OK so I installed a new drive chain today.....first time to do this and lucky me the chain was rivet type......so I used this tool http://www.mikesxs.net/product/35-0006.html Didn't come with ANY instructions (for future reference) but after awhile I...

So after spending the day installing my new hydraulic clutch conversion kit (which works great btw :thumbsup: ), I decided to go ahead and change my oil since I am getting ready for a short roadtrip next week. I have the Heiden oil filter/cooler mod and have never had any troubles with it. I...

OK just when I think my new hydraulic clutch from Hugh is good to go I discover that the clutch is not engaging/disengaging at all. I tested in driveway and thought it worked but it isn't working at all. Not even partially!!! Turns out I was just hitting the shift lever hard enough to get it in...

Battery Box and Front Brake Caliber (RH Side) - 1980 XS650G Original parts pulled from a working setup! Brake Caliber (RH)---- Pulled from working setup. Piston and seals look worn, probably needs a rebuild kit for best efficiency. Includes original bleeder screw, mounting bolts + washers, one...

I'm stumped. I bought a new M/C, SS lines, and new brake pads for the front disc brake on my 80 Special II. Previous to this, brakes worked fine. I installed everything but noticed the pads rub the rotor a little much....anyway I can not for the life of me get any brake movement. I took the...

Hi all, I am looking to possibly buying parts or a kit to do a PMA swap on my 1980 Special. The PMA kit on MikesXS looks identical to the XS-Charge kit, and if true, would include a 130-Watt stator. Is there a big difference between the 130-Watt compared to say, 200-Watt or even 220-Watt...

Firstly, I'm a noob. OK I have been try to remove the starter solenoid with no success. I ended up rounding out the top of the screw and can't get a socket to stay on the bolt. I've already removed the airboxes but still can't properly remove the solenoid. So now I am trying to remove the metal...

Yes.....fml....... over-torqued my brand-new Iridium spark plug. :banghead: Left the bolt portion in my cylinder. Now trying to figure out how to get it out? No access to welding tools, blow torches or dynamite. I don't think I have an easy-out and the auto store is 3 miles away. My bike is my...

Finally 21! :)