miketweedie
XS650 Addict
Thanks guys. I am currently using a 110VAC MIG. I have a nice 220 machine, but no way of powering it at the moment. I pitched the idea of moving the dryer into the hall and using the laundry room as a workshop, but the minister of domestic affairs had some choice words for me on that proposal.
@jpdevol I think you're right that the .25" plate is overkill, I just have a large piece of it in the metal bin and figured it saved me a trip to the store. I drilled the appropriate radius into it with a step-bit, so it hugs the frame tightly, then cut it to the right shape, but frankly it might be easier to just start over with thinner material. My tank bungs, seat mount, coil bracket etc. all welded up nicely and survived the "smash it with a hammer" test, but this piece of plate just seems too thick to get penetration.
I'll grab some pics this afternoon and look for your feedback. Fully aware of the harsh comments that might ensue, haha.
Thanks again.
@jpdevol I think you're right that the .25" plate is overkill, I just have a large piece of it in the metal bin and figured it saved me a trip to the store. I drilled the appropriate radius into it with a step-bit, so it hugs the frame tightly, then cut it to the right shape, but frankly it might be easier to just start over with thinner material. My tank bungs, seat mount, coil bracket etc. all welded up nicely and survived the "smash it with a hammer" test, but this piece of plate just seems too thick to get penetration.
I'll grab some pics this afternoon and look for your feedback. Fully aware of the harsh comments that might ensue, haha.
Thanks again.