Noidea
XS650 Addict
gotmy 73tx running been riding around no oil leaks after I replaced the gaskets again and I had some leakage from the pcv but I blocked one side off and routed a hose out the other as well as put the new proper amount of oil in so it’s not over full. Using that tsb. The only problem I have is. The idle Ian wher eits supposed to be with the choke on itll idle high and stay there when I turn it off itll stay on than die out. Almost the same as my original problem. I’ve cleaned the circuit as well and all the jets and adjusted my float height to proper spec of 25mm both carbs. Idle screw turned out to spec of what’s in thecarb guide as well as my jets are all spec size. Running everything stock. My question is are these the proper pilot jets? If they aren’t I can see how I’m getting the problem I am. The pictures I see are slightly different all the time some having just 1 hole some having 2. So I’m not sure these are also the stock numbers of 42.5 which led me to beleive they’re the right one just trying to solve my idle problem