Hi Dave welcome to the site.
Where in Fla do ya live?
left side cover removal video
front sprocket nut torque (47 ft-lb)
drum brake instructions
I would loosen this nut before removing chain and jacking up the rear wheel.
REAR WHEEL Axle nut:torque (l08 ft-lb)
A. Removal
Place machine on center stand.
Disconnect the tension bar, and the brake
rod from the rear shoe plate. Pay strict
attention to the presence and location of
the tension bar lock washer and cotter
key. These are safety parts and must be
included during assembly.
Loosen the chain tension adjusting nuts
and bolts on both right and left sides.
Remove the rear axle cotter pin and nut.
Remove the right-hand chain adjuster and
distance collar.
Remove the rear brake plate.
Lean the machine to the left and remove
the rear wheel assembly.
WHEEL SPROCKET
1. Bend the lock washer ears flat.
2. Remove the sprocket mounting bolts.
Check the lock washer and bolt for
damage. If the lock washer is not bent
over the hexagon bolt head, or is broken,
or the bolt is loose, the sprocket can come
loose. sprocket bolts torque (22 ft-lb)