Pulled the forks all apart this afternoon. Scary as the Allen head bolts holding the lower fork leg to the damper assemblies on both forks were only finger tight!
What do you guys make of the attached photo of stanchions? Both are straight, but some scoring and the odd bit of rust which would possibly damage the new seals. Figure use some emery cloth or 400 grit paper on the small rust specs? The other issue is two types of washers used on the allen head bolts. Rubber on one and fibre on the other. What is correct ?
What do you guys make of the attached photo of stanchions? Both are straight, but some scoring and the odd bit of rust which would possibly damage the new seals. Figure use some emery cloth or 400 grit paper on the small rust specs? The other issue is two types of washers used on the allen head bolts. Rubber on one and fibre on the other. What is correct ?