GeorgeOC
XS650 Junkie
On my stock wiring harness, in the portion of the harness positioned under the tank I have the following:
Grey x2
Orange x2
Blue/Red and a Blue/White: > Diode
Red/White
Pink, and a Brown: > Horn
Black x1: upper engine mount ground
The above matches the replacement harness from Mikes. I'm also going with a PAMCO e-advance setup, replacing the stock points. The kit included a new coil. Coming off that now single coil, are just 2 wires. A Black/White, and a Blue.
Grey x2
Orange x2
Blue/Red and a Blue/White: > Diode
Red/White
Pink, and a Brown: > Horn
Black x1: upper engine mount ground
The above matches the replacement harness from Mikes. I'm also going with a PAMCO e-advance setup, replacing the stock points. The kit included a new coil. Coming off that now single coil, are just 2 wires. A Black/White, and a Blue.