Bjorn
XS650 Addict
Made some temporary bracket for the advance unit and the coil. It's a close fit but they can live underneath the tank.
Didn't want to weld onto the frame just yet. Want to run this system for a while before I do that.
One thing I'm not sure about (being a former environment test engineer) the advance unit is nicely potted to protect the components from moisture and other ingress. However I doubt that the flip switch is IP rated....
On thing I learned is that you want to prevent components open to the elements to hang downwards. The water droplets will hang on, giving them time to work their way in thru wicking/capillary action. Beter to have it vertically so water runs down.
*Nerd mode out*
Didn't want to weld onto the frame just yet. Want to run this system for a while before I do that.
One thing I'm not sure about (being a former environment test engineer) the advance unit is nicely potted to protect the components from moisture and other ingress. However I doubt that the flip switch is IP rated....
On thing I learned is that you want to prevent components open to the elements to hang downwards. The water droplets will hang on, giving them time to work their way in thru wicking/capillary action. Beter to have it vertically so water runs down.
*Nerd mode out*