Young Will
XS650 Enthusiast
Recently put new turn signals on my 1980 xs650, also put in a new 522 flasher relay. I had the turn signals working a couple of weeks ago but after taking them off and reinstalling them I think I messed something up. The signal fuse now blows everytime I try to turn the turn signals on. So what I'm thinking is I messed up the wring.
(Third picture)At the tail light I have the blue and yellow wire's from the tail light going to the blue and yellow wire at the tail. Then the black wire on the tail light is going to the one of the two black wires with the two connectors.
The rear left turn signal positive wire is going to the light brown wire and the negative (ground) wire is going to the black wire with 2 connectors. The right rear turn signal positive wire is going to the light or dark green wire and the ground is going to the other 2 connector black wire.
(Fourth picture) In the front the left turn signal positive wire is going into a double connector which has a light brown wire going in and out of the double connector. Then the ground wire is going to a double connector that is attached to the headlight with a kind of dark blue color wire (not sure the color but it's not the yellow or green wire in head light, so the other wire of the three). The right turn (picture two) signal positive wire is going into the a double connector with a dark green wire going in and out of it. The negative wire is then plugged into the head light in the double connector with a yellow wire in and out of it.
See pictures above to see what I'm saying. Also the red wire and black wire is from the turn signals. Also my first picture is just a main photo of all the headlight wiring and I noticed that there is a loose yellow wire at the top left and I was wondering if this goes anywhere.
Also I'm not really sure how to use a wiring diagram, so if anyone has a picture or can explain that would be great.
Thanks