As I was happy and taking my freshly rebuilt bike for its first ride, I noticed an oil leak. Thinking the worst, I look and notice one of the pins on the rocker cover vibrated itself out!
Looks like there's a little bit of the pin still in the hole:
I took some measurements and the hole is 7mm deep.
I am hesitating between two ideas mentioned in previous threads (Here and Here) the leading one being using a helicoil (never used one before) and the other being to tap the hole to a M8 1.0 and then use a M8 to M6 pin.
Please let me know what method you think is superior and more long lasting (I'm resisting the urge to JB weld it and shmear ATV on there...)
Looks like there's a little bit of the pin still in the hole:
I took some measurements and the hole is 7mm deep.
I am hesitating between two ideas mentioned in previous threads (Here and Here) the leading one being using a helicoil (never used one before) and the other being to tap the hole to a M8 1.0 and then use a M8 to M6 pin.
Please let me know what method you think is superior and more long lasting (I'm resisting the urge to JB weld it and shmear ATV on there...)