fox23
XS650 Addict
Can anyone provide me a part number or source of buying a new pan head countersunk screw that goes into the shaft base of the starter bendix? pics below... thanks guys!
-
Enjoy XS650.com? Consider making a donation to help support the site.
XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Starter bendix shaft countersunk screw?
- Thread starter fox23
- Start date
I am Carbon
shade tree mechanic
Hey Fox You are probably have to go to the hardware store.
I (think) it's a 6mm
98580-06018-00 SCREW, PAN HEAD
I (think) it's a 6mm
98580-06018-00 SCREW, PAN HEAD
fox23
XS650 Addict
What parts fiche did you find that in Carbon? I look through them all and couldn't see a PN indicated anywhere.
If its just a normal 6mm pan head bolt I have no problem getting it at a hardware store, I just don't have one on hand to see if there is anything special about it.
If its just a normal 6mm pan head bolt I have no problem getting it at a hardware store, I just don't have one on hand to see if there is anything special about it.
I am Carbon
shade tree mechanic
Boats.net it was not available http://www.boats.net/parts/search/Y...TOR UNIT XS650D - E - E006501- - F/parts.html
My bad Fox the number was not for that screw
That screw it'n even listed
My bad Fox the number was not for that screw
That screw it'n even listed
fox23
XS650 Addict
Yea I was gunna say....
Now you see my problem, hahah.
Now you see my problem, hahah.
I am Carbon
shade tree mechanic
Yes I guess so.
Well if no one else chimes in. I could pull a clutch basket off the engine I have sitting and take a look
Well if no one else chimes in. I could pull a clutch basket off the engine I have sitting and take a look
Why do you need that bolt? Did you remove it? I can't see any reason to remove it.
Leo
Leo
Carry the case in with you. Try bolts till you find one that fits.
Leo
Leo
fox23
XS650 Addict
No idea why it was removed, basket case engine I purchased like this. I was doing an order of a bunch of SS bolts for the rest of the engine, so I just added a couple for this and hopefully one will work. A standard M6x1.0 threads in about 12mm.
