650gts
XS650 Enthusiast
As soon as I tighten the castle nut even a little, the wheel stops spinning freely.
Now I'm not even sure if this set up is even right. I took the hub from a 19" wheel and laced it to a 21" rim.
The spacer thing on the disc side (see arrow) remains still when the wheel turns. I pulled this off of my Special mag wheel.
I also added a second large washer under the castle nut because the nut went past the cotter pin hole.
Take a look at the pictures and ket me know if you see anything missing or incorrect. This is driving me insane.
Thanks!
Now I'm not even sure if this set up is even right. I took the hub from a 19" wheel and laced it to a 21" rim.
The spacer thing on the disc side (see arrow) remains still when the wheel turns. I pulled this off of my Special mag wheel.
I also added a second large washer under the castle nut because the nut went past the cotter pin hole.
Take a look at the pictures and ket me know if you see anything missing or incorrect. This is driving me insane.
Thanks!