Got the clutch back together w/ the APE 8 plate kit. Stole an extra steel plate off my other build. almost missed the thicker plate on the inward position! But it all went together as easy as stock! Used some EBC springs and aluminum retainers, torqued em down to 80 in lbs. Deglazed all the steel plates on some glass w/ 600 grit too.
Replaced the oil bushing w/ a 12mm long from McMaster (thanks @5twins for the advice!), Chamfered the opening and replaced the oil seal too (filled the case groove w/ "The Right Stuff" RTV first) and then installed the pushrod.
Also ordered a battery strap.
Running total: $1098.43
Replaced the oil bushing w/ a 12mm long from McMaster (thanks @5twins for the advice!), Chamfered the opening and replaced the oil seal too (filled the case groove w/ "The Right Stuff" RTV first) and then installed the pushrod.
Also ordered a battery strap.
Running total: $1098.43
Last edited: