Anyone brave enough to DIY a set?????
Been lookin' at those for quite a while. Really interested.
Ok, ok. A set of four, at $75, should be here in 3 weeks. (slow shipping)...
Anyone brave enough to DIY a set?????
Hey TwoMany, did you ever get those KEDO screws...
... and install them?
Update? Was it still the Kedo's when we rode?Installed my Kedo adjusters about 1-1/2 years ago. All fine so far.
View attachment 205336
Setting valve lash on these is tricky. Difficult to get a feeler gauge under the ball flat-end, it wants to stick to the valve stem end.
The adjuster screws have a 1mm pitch, which works out to 9° of rotation for each 0.001" of clearance. So, I adjust lash by backing out from a seated position by a number of degrees.
30° gives about 0.003" lash.
45° gives about 0.005" lash.
60° gives about 0.007" lash.
90° gives about 0.010" lash.
...etc....
Update? Was it still the Kedo's when we rode?
Check.Automotive H6024 headlamp