BigGeorge
XS650 Addict
I found it on line at I believe a horse and tack shop. It was the least expensive I could find. It's probably all the same except for the price. The alcohol is just drug store isopropyl alcohol.
You didn't get hurt and everything is alright.I did
Came close but luckily it missed me and the bike and now it's not only more organized, it's lighter and bolted to the wall and work bench.You didn't get hurt and everything is alright.
Thx. Tractor supply is supposed to carry it but nothing near me has it (Plus I’m in Canada).I found it on line at I believe a horse and tack shop. It was the least expensive I could find. It's probably all the same except for the price. The alcohol is just drug store isopropyl alcohol.
Looks like 16 oz in the pic.George, how big is that bottle you got (ounces)? I see Tractor Supply carries it but no bottle size given, and it would need to be bought on-line and shipped to the store. The bottle cost $20 too. Only other "deal" I've found is from eBay .....
https://www.ebay.com/itm/164146792245?chn=ps&_trkparms=ispr=1&amdata=enc:1yWYTZvTeTEqg6HgOHC2gtA96&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=164146792245&targetid=1583904486842&device=c&mktype=&googleloc=9005489&poi=&campaignid=15275224983&mkgroupid=131097072938&rlsatarget=pla-1583904486842&abcId=9300697&merchantid=115332732&gclid=EAIaIQobChMIyMuNicPo_gIVWgyzAB1n1wjxEAQYCyABEgLrIPD_BwE
The bottle is 16fl ozGeorge, how big is that bottle you got (ounces)? I see Tractor Supply carries it but no bottle size given, and it would need to be bought on-line and shipped to the store. The bottle cost $20 too. Only other "deal" I've found is from eBay .....
https://www.ebay.com/itm/1641467922...MIyMuNicPo_gIVWgyzAB1n1wjxEAQYCyABEgLrIPD_BwE
The bottle is 16fl ozI got it on line at either Big Dee's tack and vetinary supplies or Paddock saddlery I can't remember which one.The bottle is 16fl oz
The bottle is 16fl oz
....careful on things like o-rings cuz they get longer as well as fatter". I wonder if that may have another use?Use wintergreen alot, Finally got a larger bottle on Amazon. The rubber part dries rub on some sil-glide seems to stay soft a long time.
careful on things like o-rings cuz they get longer as well as fatter....
Usually unless they are an odd unavailable size, I just replace "O" rings. I mostly use the wintergreen / alcohol mixture for factory hoses that are pre-shaped or have special bends and no longer available and have become petrified over time.....careful on things like o-rings cuz they get longer as well as fatter". I wonder if that may have another use?
I've used both the 70% and the 91% alcohol. It didn't seem to make any difference. Both worked good.What % alcohol are you fellas using, most store bought isopropanol is either 70% or neh, maybe 95%,
.........................
Tool> Tubing notcher (el cheap-o harbor fright). You can notch 2 3/8 sch 80 pipe, very slowly, oiling constantly everything, with it - change metric bolts to metric hard studs, hard washers, hard nuts, locktite (red) adaptor to shaft. remove burrs from shaft. Mind cutting speeds have to be very slow. (use the chart, don't guess...and forget driving it with a hand drill - way too fast> fubar) I use an old camelback gearhead drillpress with flat leather belt...and notch angle iron to weld to rounds with it. Eventually you'll have to re-bush...see adjustable ream set... Best!
did anybody mention> https://www.chopperbuildershandbook.com/
lotta ol'timestuff. Breathe...