After I test it out, it should be.You think it will be up for 500 miles of spirited riding at the Ozarks rally?
Last edited:
After I test it out, it should be.You think it will be up for 500 miles of spirited riding at the Ozarks rally?
This one is Gary's.One month turn around time. Quite impressive. Will you need to sell this one before you begin on the next?
Spose we could lop off the legs and bore the end of them out of that fitting?Bike #2 has extended fork legs. The bottom of the fork legs has two pins holding bottom piece to the main leg. The forks I have do not this piece on it. Both of these extended legs have this part welded on and two pins holding it on. The PO drilled more holes and then welded. I am not sure I can get them off. Parts lists does not show this as a separate item. Does anyone have two sets of 70/71 fork legs? I really just need the bottom part.
Do you have a lathe? I could send you both forks from both bikes, if you can do it.Spose we could lop off the legs and bore the end of them out of that fitting?
When does the rally start? Good luck. I only had a few miles on the bike. I think it is running a little rich.And it will be my ride for the Ozarks rally!
View attachment 213030
Thursday, May 5.When does the rally start?
Brazed so could heat to remove?Bike #2 has extended fork legs. The bottom of the fork legs has two pins holding bottom piece to the main leg. The forks I have do not this piece on it. Both of these extended legs have this part welded on and two pins holding it on. The PO drilled more holes and then welded. I am not sure I can get them off. Parts lists does not show this as a separate item. Does anyone have two sets of 70/71 fork legs? I really just need the bottom part.
Hey that's PPO!Think the PO had enough silicone seal?